Product Brand & Model:
MTX Thunder 250d Mono
RMS power measured at 12.5 Volts DC:
125 Watts x 1 into a 4Ohm load with less than 0.5% Thd+N
250 Watts x 1 into a 2 Ohm load with less than 1% Thd+N
Dynamic power (IHF-202 Standard) measured at 14.4 Volts DC
200 Watts x 1 into a 4 Ohm load
350 Watts x 1 into a 2 Ohm load
Signal to Noise Ratio:
90dB A-Weighted
Damping Factor:
>200
Frequency Response:
20Hz-200Hz
Maximum Input:
8Vrms
Thunder EQ:
Variable Bass Boost (0-18dB) centered at 40Hz
EBC External Bass Control
Crossover:
Variable 40Hz to 200Hz, 24dB/octave low pass
Dimensions:
7” x 9” x 2” (17.8cm x 22.8cm x 5cm)
8-1/4” x 9” x 2” (20.9cm x 22.8cm x 5 cm) Including IsoFeet™
Condition of all items:
Used, in good shape, functions perfectly
Total Price: :
$40 plus ship
Shipping Terms: :
You pay via UPS
Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.
Additional info:
This is a old school one
http://archive.mtx.com/caraudio/archive/thunder250d.cfm
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
MTX Thunder 250d Mono
RMS power measured at 12.5 Volts DC:
125 Watts x 1 into a 4Ohm load with less than 0.5% Thd+N
250 Watts x 1 into a 2 Ohm load with less than 1% Thd+N
Dynamic power (IHF-202 Standard) measured at 14.4 Volts DC
200 Watts x 1 into a 4 Ohm load
350 Watts x 1 into a 2 Ohm load
Signal to Noise Ratio:
90dB A-Weighted
Damping Factor:
>200
Frequency Response:
20Hz-200Hz
Maximum Input:
8Vrms
Thunder EQ:
Variable Bass Boost (0-18dB) centered at 40Hz
EBC External Bass Control
Crossover:
Variable 40Hz to 200Hz, 24dB/octave low pass
Dimensions:
7” x 9” x 2” (17.8cm x 22.8cm x 5cm)
8-1/4” x 9” x 2” (20.9cm x 22.8cm x 5 cm) Including IsoFeet™
Condition of all items:
Used, in good shape, functions perfectly
Total Price: :
$40 plus ship
Shipping Terms: :
You pay via UPS
Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.
Additional info:
This is a old school one
http://archive.mtx.com/caraudio/archive/thunder250d.cfm
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.