Alpine CDA-7894
Condition: Slightly Used
Total Price: 225.00 plus PP fees
Shipping Terms:
Free to the normal 48. I will/have ship INTL, but additional rates apply.
Many can verify my shipping quality.
Pictures: - Unless you are Chuck Norris, Jason Statham or the OP who is an Upgraded member and has 10 iTrader feedbacks that are are positive, you must post a picture of the exact item you are selling. I like to provide pics anyway.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Additional info:
Selling this for my buddy Eric. He got it for his car, but he cannot step off of his 117.....so now I have to sell it. He paid more for it, but that is not my problem. My problem is that he went back to college and my wife wants it out of the house as I have enough of my audio own stuff here. Pm me with questions.
The piddly stuff:
motorized (3-way angle), detachable face
switchable green/amber button illumination
blackout display mode turns off display, reduces power consumption, and enhances sound quality
MaxTune SQ tuner
18 presets
V-Drive hybrid MOSFET60 internal amp high-current draw requires direct fused connection to your battery (see "Wiring Note" in the Detailed Info section)
plays MP3 files on CD-R or CD-RW plus audio CDs, CD-Rs, and CD-RWs
Bass Engine® Plus (bass center frequency, width, and level, plus treble center frequency and level adjustments, as well as 4-channel digital time alignment and a 3-position, 12 dB/octave crossover)
Media Xpander
XM Satellite Radio controls (XM Radio subscription, tuner, antenna required to receive the satellite radio signal.) service is available only in the lower 48 states, not available in Alaska, Hawaii, or U.S. territories
CD changer controls for Alpine Ai-NET changers only add an Alpine changer to your receiver order, and save $$ with Crutchfield's package discount
optional auxiliary input
4-volt front/rear/subwoofer preamp outputs
wireless remote
clock
27 watts RMS/60 peak x 4 channels
CD frequency response 5-20,000 Hz
CD signal-to-noise ratio 105 dB
FM sensitivity 9.3 dBf
Wiring Note: While providing high power output, this unit can draw a substantial amount of current. Per Alpine, this receiver's constant power wire must be connected directly to the positive terminal of the battery in your vehicle, and 10 gauge wire must be used to make the connection. This requires a length of 10 gauge power cable, an in-line fuse holder with a 20 to 30-amp fuse and a ring terminal (the ring terminal is used to connect the cable to the battery clamp). Although all the pieces of a basic amplifier wiring kit will not be not needed, if you do not wish to assemble the required items separately, the power wire and in-line fuse holder from a basic 10 gauge kit can be used to connect the constant power wire to your vehicle's battery. For a secure, permanent connection, the 10 gauge cable must be soldered to this receiver's 16 gauge constant power wire.
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
Condition: Slightly Used
Total Price: 225.00 plus PP fees
Shipping Terms:
Free to the normal 48. I will/have ship INTL, but additional rates apply.
Many can verify my shipping quality.
Pictures: - Unless you are Chuck Norris, Jason Statham or the OP who is an Upgraded member and has 10 iTrader feedbacks that are are positive, you must post a picture of the exact item you are selling. I like to provide pics anyway.
Additional info:
Selling this for my buddy Eric. He got it for his car, but he cannot step off of his 117.....so now I have to sell it. He paid more for it, but that is not my problem. My problem is that he went back to college and my wife wants it out of the house as I have enough of my audio own stuff here. Pm me with questions.
The piddly stuff:
motorized (3-way angle), detachable face
switchable green/amber button illumination
blackout display mode turns off display, reduces power consumption, and enhances sound quality
MaxTune SQ tuner
18 presets
V-Drive hybrid MOSFET60 internal amp high-current draw requires direct fused connection to your battery (see "Wiring Note" in the Detailed Info section)
plays MP3 files on CD-R or CD-RW plus audio CDs, CD-Rs, and CD-RWs
Bass Engine® Plus (bass center frequency, width, and level, plus treble center frequency and level adjustments, as well as 4-channel digital time alignment and a 3-position, 12 dB/octave crossover)
Media Xpander
XM Satellite Radio controls (XM Radio subscription, tuner, antenna required to receive the satellite radio signal.) service is available only in the lower 48 states, not available in Alaska, Hawaii, or U.S. territories
CD changer controls for Alpine Ai-NET changers only add an Alpine changer to your receiver order, and save $$ with Crutchfield's package discount
optional auxiliary input
4-volt front/rear/subwoofer preamp outputs
wireless remote
clock
27 watts RMS/60 peak x 4 channels
CD frequency response 5-20,000 Hz
CD signal-to-noise ratio 105 dB
FM sensitivity 9.3 dBf
Wiring Note: While providing high power output, this unit can draw a substantial amount of current. Per Alpine, this receiver's constant power wire must be connected directly to the positive terminal of the battery in your vehicle, and 10 gauge wire must be used to make the connection. This requires a length of 10 gauge power cable, an in-line fuse holder with a 20 to 30-amp fuse and a ring terminal (the ring terminal is used to connect the cable to the battery clamp). Although all the pieces of a basic amplifier wiring kit will not be not needed, if you do not wish to assemble the required items separately, the power wire and in-line fuse holder from a basic 10 gauge kit can be used to connect the constant power wire to your vehicle's battery. For a secure, permanent connection, the 10 gauge cable must be soldered to this receiver's 16 gauge constant power wire.
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.