So I went to get my hands dirty installing my first remote start in my sisters 02 civic today.
I thought everything went smooth. I programmed the bypass and wired up the wire I THOUGHT I needed.
Anyway when I hit the remote start button I get fuel pump coming on as if it was in the second position of the key ignition. But that is all I get, it never tries to turn over or crank. What am I missing?
Fallowing are installed on the 8 pin heavy gauge harness
Red = Factory White Constant 12 volt White wire
Violet = Factory Black/White wire Starter
Pink = Factory Black/Yellow Ignition 1
Red/White = Factory Black/Red Ignition 2/ Accessory
Orange = Factory White/Red Accessory
I have a feeling I need to cut the Ignition 1 and run it through the pink/black and pink/white
The other wires I can list if needed.
I thought everything went smooth. I programmed the bypass and wired up the wire I THOUGHT I needed.
Anyway when I hit the remote start button I get fuel pump coming on as if it was in the second position of the key ignition. But that is all I get, it never tries to turn over or crank. What am I missing?
Fallowing are installed on the 8 pin heavy gauge harness
Red = Factory White Constant 12 volt White wire
Violet = Factory Black/White wire Starter
Pink = Factory Black/Yellow Ignition 1
Red/White = Factory Black/Red Ignition 2/ Accessory
Orange = Factory White/Red Accessory
I have a feeling I need to cut the Ignition 1 and run it through the pink/black and pink/white
The other wires I can list if needed.