Product Brand & Model:
JBL BPX 500.1
Included is an unused-brand new bass knob and wire. Also included are two extra fuses for the amp, that were also un-used.
The box is not included, and I do not have the manual, but it can be downloaded online.
Condition of all items:
Used-like new. Ran perfect when I took it out, has been sitting on my desk with a blanket over it to protect it for a few days.
Has minor scratches and what not from installing it/uninstalling it. All screws are original, and gold plated.
Total Price: :
$200 OBO
Shipping Terms: :
Shipping is included in the asking price. Will be well packed, and insured against damage.
This item is heavy, it weighs about 16.4 pounds when I weighed it on my digital scale.
That is not including the packing material and the box.
PayPal fees included in price.
Pictures: -
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Additional info:
This is a ridiculously powerful and efficient amp. If you could not tell by the photos this amp has Crown amp technology built in. These are among one of the better amps you can get. Reason for selling is that I have a coupe now, with limited space and it is just to large to fit where I need it to fit.
It has an auto-sense for distortion and when you have reached the "max" gain input for the amp, makes setting the gains easy.
It also has the slot for a neon bulb should you ever want to place one inside.
As you can see in the photos, it does not mess around with all those copper coils and that cast aluminum heat sink. The top is tinted plexiglass.
Here are the specifics.
Power Series Parallel/Bridge Monoblock Amplifier
RMS power Output:
4 Ohms: 237 watts x 2 chan.
1 Ohms: 674 watts x 1 chan.
4 Ohms Bridged: 718 watts x 1 chan.
Full MOSFET power Supply
Variable High-Pass / Low-Pass Crossover (32-320 Hz)
Selectable Crossover Slope (12 / 24 dB)
Bridgeable: double the voltage from one channel into impedances between 2 and 4 ohms - use parallel wiring to double the current from one channel at 1 ohm.
Dynamic Bass Optimization (DBO) Subsonic Filter
Preamp Outputs
CEA-2006 Compliant
S/N Ratio: 66.4 dB
Dimensions: 12-1/4" L x 13" W x 2-9/16" H
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
JBL BPX 500.1
Included is an unused-brand new bass knob and wire. Also included are two extra fuses for the amp, that were also un-used.
The box is not included, and I do not have the manual, but it can be downloaded online.
Condition of all items:
Used-like new. Ran perfect when I took it out, has been sitting on my desk with a blanket over it to protect it for a few days.
Has minor scratches and what not from installing it/uninstalling it. All screws are original, and gold plated.
Total Price: :
$200 OBO
Shipping Terms: :
Shipping is included in the asking price. Will be well packed, and insured against damage.
This item is heavy, it weighs about 16.4 pounds when I weighed it on my digital scale.
That is not including the packing material and the box.
PayPal fees included in price.
Pictures: -
Additional info:
This is a ridiculously powerful and efficient amp. If you could not tell by the photos this amp has Crown amp technology built in. These are among one of the better amps you can get. Reason for selling is that I have a coupe now, with limited space and it is just to large to fit where I need it to fit.
It has an auto-sense for distortion and when you have reached the "max" gain input for the amp, makes setting the gains easy.
It also has the slot for a neon bulb should you ever want to place one inside.
As you can see in the photos, it does not mess around with all those copper coils and that cast aluminum heat sink. The top is tinted plexiglass.
Here are the specifics.
Power Series Parallel/Bridge Monoblock Amplifier
RMS power Output:
4 Ohms: 237 watts x 2 chan.
1 Ohms: 674 watts x 1 chan.
4 Ohms Bridged: 718 watts x 1 chan.
Full MOSFET power Supply
Variable High-Pass / Low-Pass Crossover (32-320 Hz)
Selectable Crossover Slope (12 / 24 dB)
Bridgeable: double the voltage from one channel into impedances between 2 and 4 ohms - use parallel wiring to double the current from one channel at 1 ohm.
Dynamic Bass Optimization (DBO) Subsonic Filter
Preamp Outputs
CEA-2006 Compliant
S/N Ratio: 66.4 dB
Dimensions: 12-1/4" L x 13" W x 2-9/16" H
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.